| The minimoto carbon race reed is an easy to | | | | standard reed being stainless and split). |
| fit performance part which is designed to | | | | Undo the two crosshead screws then remove the |
| give optimum engine fuelling conditions | | | | standard stainless reed and replace with the |
| providing large gains in acceleration and top | | | | carbon race reed. |
| speed. The standard reeds used in all air | | | | |
| cooled Chinese minimotos are manufactured | | | | Note: To get more power you can remove the |
| from stainless steel and are prone to flutter | | | | centre bar of the reed manifold by using a |
| at high revs resulting in a loss of power and | | | | small saw (this is optional).7) Now just |
| engine stuttering Following are the easy to | | | | reverse the procedure using thread locking |
| follow instructions for fitting your | | | | compound on all screws to ensure they do not |
| performance carbon race reeds:-Fitting of | | | | vibrate loose it.Now experience and enjoy the |
| minimoto carbon race reeds1) First of all | | | | power gains from your newly fitted carbon |
| remove the black air filter unit from the | | | | race reeds.Minimotos4u carbon race reeds are |
| rear of the carburator by undoing and | | | | made from Pre-preg dual laminate carbon fibre |
| removing the two crosshead | | | | sheet cut to within 0.1mm tolerance.David |
| | | | Welton is the Director of Minimotos4u with |
| securing screws.2) Ensure the petrol tap is | | | | over 20 years of motorcycle experience and a |
| turned OFF and remove the petrol pipe from | | | | clear passion for minimotos. |
| the carburator by depressing the retaining | | | | |
| clip and gently pulling clear.3) Undo the | | | | Minimotos4u is a family run business based |
| knurled top of the carburator and lift off | | | | in North Lincolnshire. With over experience |
| carefully, the throttle slide which is | | | | of supplying customers with top quality |
| attached to the throttle cable will lift | | | | certified minimotos from the most reputable |
| clear.4) Then undo and remove the two Allen | | | | suppliers. We carry extensive stocks of |
| screws which go through the carburator body | | | | minimoto spares, performance parts, minimoto |
| securing it to the engine, and lift the carb | | | | decals and much more. Specialising in race |
| away.5) Undo and remove the 4 Allen screws | | | | tuned minimotos in MotoGP livery, we also |
| that retain the carburator manifold and reed | | | | stock dirt bikes and can cater for all your |
| block and lift clear.6) The reed block has 2 | | | | minimoto needs. |
| crosshead screws which retain the reed (the | | | | |