| So you have either purchased or built your new | | | | Any ramp should be constructed to have an |
| storage shed, but now you need to find a way to | | | | incline of no more than 2 inches per foot of |
| get your gear in and out of your new shed. | | | | length. That means if your shed is one foot off |
| Building a DIY shed ramp is the perfect solution to | | | | grade your ramp must be at least 6 feet long. If |
| help you get your lawnmower, tiller, wheelbarrow | | | | your ramp is any steeper than that it could cause |
| and other heavy equipment in and out of your | | | | problems in a couple different ways. First think |
| shed. When building your DIY shed ramps you | | | | that could happen is the blade of your ride on |
| have to think about your own weight as well as | | | | lawn tractor could strike the entrance to the shed |
| the weight of your equipment. If not built | | | | if the ramp is too steep or if it became wet the |
| correctly your DIY shed ramps could collapse the | | | | ramp could become slippery and cause you to fall |
| first time that you try to drive your ride on | | | | and injure yourself. |
| lawnmower out of your shed. | | | | |